EN 1504-2: 2004 13 0086 EN 13813: 2002 IZJAVA O LASTNOSTIH Sikafloor-20 PurCem 020802020010000011088 EN 13813:2002 1. Tip izdelka: Enotna identifikacijska oznaka tipa proizvoda: 2. Tip, serijska ali zaporedna številka ali kateri koli drug element, na podlagi katerega je mogoče prepoznati gradbene proizvode, v skladu s členom 11(4): 3. Predvidena uporaba ali predvidene vrste uporabe gradbenega proizvoda v skladu z veljavno harmonizirano tehnično specifikacijo, kot jih predvideva proizvajalec: 4. Ime, registrirano trgovsko ime ali registrirana blagovna znamka in naslov proizvajalca v skladu s členom 11(5): 5. Kontaktni naslov: Po potrebi ime ali naslov pooblaščenega zastopnika, katerega pooblastilo zajema naloge, opredeljene v členu 12(2): 6. AVCP: Sistem ali sistemi ocenjevanja in preverjanja nespremenljivosti lastnosti (AVCP) gradbenega proizvoda, kot je določeno v CPR v Prilogi V: 7. Organ za tehnično ocenjevanje (hen): Za izjavo o lastnostih glede gradbenega proizvoda, za katerega velja harmoniziran standard: 8. Organ za tehnično ocenjevanje (ETA): Za izjavo o lastnostih glede gradbenega proizvoda, za katerega je bila izdana evropska tehnična ocena Sikafloor-20 PurCem 20 PurCem Saržna številka (Glej deklaracijo na izdelku) Trikomponentni barvni estrih visoke trdnosti, izdelan iz poliuretanskih smol, cementa in agregata, na vodni osnovi, za tlake, primerne zavisoke mehanske in kemijske obremenitve. EN 13813 CT - C50 - F10 - AR0.5 Sikafloor 20 PurCem Sika Limited Watchmead Welwyn Garden City Hertfordshire AL7 1BQ United Kingdom Glej poglavje 4. Sistem 4 Manufacturer performed Initial Type Testing under AVCP System 4 type. Ni pomembno glej poglavje 7 1/5
9. Navedene lastnosti Bistvene značilnosti Lastnost Testni standard *Sproščanje korozivnih substanc(estrih iz umetnih snovi): ct EN 13813 *Požarne lastnosti: E fl EN 13501-1 Harmonizirane tehnične specifikacije Modul elastičnosti: F10 EN 13892-4 *Odpornost na obrabo: AR0,5 EN 13892-4 *Izolacija telesnega zvoka: NPD EN ISO 140-1 *Absorbcija zvoka: NPD EN ISO 354 EN 13813 *Toplotna odpornost: NPD EN 12664 *Kemijska odpornost: NPD EN 13529 Absorbcija vlage NPD EN 1062-3 Prepustnost za vodno paro: NPD EN 12086 Tlačna trdnost C50 EN 13892-2 1) V skladu s Sklepom Komisije 2010/85/EU z dne 9. februarja 2010 izdelek izpolnjuje razred odziva na ogenj E / Efl brez nadaljnjega preskušanja 2/5
EN 1504-2:2004 1. Tip izdelka: Enotna identifikacijska oznaka tipa proizvoda:: 2. Tip, serijska ali zaporedna številka ali kateri koli drug element, na podlagi katerega je mogoče prepoznati gradbene proizvode, v skladu s členom 11(4): 3. Predvidena uporaba ali predvidene vrste uporabe gradbenega proizvoda v skladu z veljavno harmonizirano tehnično specifikacijo, kot jih predvideva proizvajalec: 4. Ime, registrirano trgovsko ime ali registrirana blagovna znamka in naslov proizvajalca v skladu s členom 11(5): 5. Kontaktni naslov: Po potrebi ime ali naslov pooblaščenega zastopnika, katerega pooblastilo zajema naloge, opredeljene v členu 12(2): 6. AVCP: Sistem ali sistemi ocenjevanja in preverjanja nespremenljivosti lastnosti (AVCP) gradbenega proizvoda, kot je določeno v CPR v Prilogi V: 7. Organ za tehnično ocenjevanje (hen): Za izjavo o lastnostih glede gradbenega proizvoda, za katerega velja harmoniziran standard: Sikafloor-20 20 PurCem Saržna številka (Glej deklaracijo na izdelku) Trikomponentni barvni estrih visoke trdnosti, izdelan iz poliuretanskih smol, cementa in agregata, na vodni osnovi, za tlake, primerne zavisoke mehanske in kemijske obremenitve. Principi 5.1 and 6.1 of EN 1504-2 Sikafloor 20 PurCem Sika Limited Watchmead Welwyn Garden City Hertfordshire AL7 1BQ United Kingdom Glej poglavje 4 Sistem 2+ 0086 Priglašeni certifikacijski organ za kontrolo proizvodnje št. 0086 je izvedel začetno preveritev proizvodnega obrata in kontrole proizvodnje in izvaja redni nadzor, presojo in vrednotenje notranje kontrole proizvodnje ter izdaja certifikat o skladnosti notranje kontrole proizvodnje št. (FPC) 5411325 8. Organ za tehnično ocenjevanje (ETA): Za izjavo o lastnostih glede gradbenega proizvoda, za katerega je bila izdana evropska tehnična ocena Ni pomembno 3/5
9. Navedene lastnosti Bistvene značilnosti Lastnost Testni standard *Odpornost na obrabo (Taber test) 1) : *Kapilarna vpojnost in prepustnost za vodo: *Obstojnost na močne kemijske obremenitve: 2) : < 3000 mg EN ISO 5470-1 w<0,1 kg/(m 2 x h 0,5 ) EN 1062-3 Razred II EN 13529 *Udarna trdnost: Razred III: 20 Nm EN ISO 6272-1 *Sprijemna trdnost pri preskusu na odtrganje: 2,0 N/mm² EN 1542 Harmonizirane tehnične specifikacije EN 1504-2: 2004 4/5
10. Lastnosti proizvoda Lastnosti proizvoda, navedenega v točki 1 in 2, so v skladu z navedenimi lastnostmi iz točke 9. Za izdajo te izjave o lastnostih je odgovoren izključno proizvajalec, naveden v točki 4: Podpisal za in v imenu proizvajalca: R&D Manager Technical Manager 6.2013 Ekološke, zdravstvene in varnostne informacije (REACH Za informacije in nasvete o varnem rokovanju, skladiščenju in odlaganju kemijskih proizvodov naj si uporabniki pridobijo zadnji varnostni list, kjer so navedeni fizikalni, ekološki, toksikološki in ostali podatki o varnosti za obravnavani proizvod. Pravno sporočilo: Informacija in še posebej priporočila, ki se nanašajo na rabo in končno uporabo Sika proizvodov, so dani v dobri veri, ki temelji na Sikinem dosedanjem znanju in izkušnjah v zvezi s proizvodi, če so pravilno skladiščeni, če se z njimi pravilno ravna in če so uporabljeni v normalnih pogojih. V praksi so razlike v materialih, podlagah in dejanskih pogojih na gradbišču take, da iz te informacije ali katerihkoli pisnih priporočil ali iz katerihkoli drugih podanih nasvetov ne moremo jamčiti tržljivosti ali primernosti za nek poseben namen, niti ne moremo prevzeti nobene odgovornosti, ki izvira iz kateregakoli zakonitega odnosa. Lastninske pravice tretjih se morajo spoštovati. Vsa naročila podležejo našim sedanjim prodajnim in dobavnim pogojem. Porabniki bi morali vedno pregledati najnovejši izvod tehničnega lista za zadevni proizvod, kopijo katerega dostavimo na zahtevo. Sika d.o.o. Telefon 01.580.95.34 Prevale 13 Fax 01.580.95.33 1236 Trzin www.sika.si 5/5
Flooring Edition 06.2013 Identification no. 02 08 02 02 001 0 000001 Version no. 01 EN 1504-2: 2004 EN 13813: 2002 13 0086 DECLARATION OF PERFORMANCE Sikafloor -20 PurCem EN 13813:2002 02 08 02 02 001 0 000001 1088 1. Product Type: Unique identification code of the product-type: Sikafloor 20 2. Type batch or serial number or any other element allowing identification of the construction product as required under Article 11(4): 3. Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer: 4. Name, registered trade name or registered trade mark and contact address of the manufacturer as required under Article 11(5): 5. Contact Address: Where applicable, name and contact address of the authorized representative whose mandate covers the tasks specified in Article 12(2): 6. AVCP: System or systems of assessment and verification of constancy of performance (AVCP) of the construction product as set out in CPR, Annex V: 7. Notified body (hen): In case of the declaration of performance (DoP)concerning a construction product covered by a harmonised standard: 20 Purcem (Batch No See packaging) Multicomponent polyurethane modified, cement and aggregate screed suitable for floors subject to heavy loading, abrasion and chemical exposure. EN 13813 CT - C50 - F10 - AR0.5 Sikafloor 20 PurCem Sika Limited Watchmead Welwyn Garden City Hertfordshire AL7 1BQ United Kingdom Not Relevant (see 4) System 4 Manufacturer performed Initial Type Testing under AVCP System 4 type. 1/5
Flooring Edition 06.2013 Identification no. 02 08 02 02 001 0 000001 Version no. 01 8. Notified body (ETA): In case of the declaration of performance concerning a construction product for which a European Technical Assessment (ETA) has been issued: Not relevant (see 7) 9. Declared performance Essential characteristics Performance Test Standard Harmonised technical specification Reaction to Fire* Release of corrosive substances (Cementitious Screed): Water permeability: Water vapour permeability Compressive strength Flexural strength E fl CT NPD EN 13501-1 EN 13813 EN 1062-3 NPD EN 12086 C50 F10 Wear Resistance: AR 0,5 Sound insulation: Sound absorption: Thermal resistance: Chemical resistance NPD NPD NPD NPD EN 13892-2 EN 13892-4 EN 13892-4 EN ISO 140-1 EN ISO 354 EN 12664 EN 13529 EN 13813:2002 * According to Commission Decision 2010/85/EU of 9 February 2010 the product fulfils the reaction-to-fire performance class E/E fl without further testing 2/5
Flooring Edition 02.2013 Identification no. 02 08 02 02 001 0 000001 Version no. 01 EN 1504-2 :2004 1. Product Type: Unique identification code of the product-type: Sikafloor 20 2. Type batch or serial number or any other element allowing identification of the construction product as required under Article 11(4): 20 Purcem (Batch No See packaging) 3. Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer: 4. Name, registered trade name or registered trade mark and contact address of the manufacturer as required under Article 11(5): 5. Contact Address: Where applicable, name and contact address of the authorized representative whose mandate covers the tasks specified in Article 12(2): 6. AVCP: System or systems of assessment and verification of constancy of performance (AVCP) of the construction product as set out in CPR, Annex V: 7. Notified body (hen): In case of the declaration of performance (DoP)concerning a construction product covered by a harmonised standard: Multicomponent polyurethane modified, cement and aggregate screed suitable for floors subject to heavy loading, abrasion and chemical exposure. Principles 5.1 and 6.1 of EN 1504-2 Sikafloor 20 PurCem Sika Limited Watchmead Welwyn Garden City Hertfordshire AL7 1BQ United Kingdom Not Relevant (see 4) System 2+ 0086 Notified factory production control certification body No. 0086 performed the initial inspection of the manufacturing plant and of factory production control and the continuous surveillance, assessment and evaluation of factory production control and issued the certificate of conformity of the factory production control (FPC) 541325 3/5
Flooring Edition 02.2013 Identification no. 02 08 02 02 001 0 000001 Version no. 01 8. Notified body (ETA): In case of the declaration of performance concerning a construction product for which a European Technical Assessment (ETA) has been issued: Not relevant (see 7) 9. Declared performance Essential characteristics Performance Test Standard Harmonised technical specification Abrasion resistance Capillary absorption and permeability to water Resistance to severe chemical attack: Impact resistance Adhesion strength by pull-off test <3000 mg EN ISO 5470-1 w < 0.1 kg/[m 2 x h 0,5 ] EN 1062-3 Class II EN 13529 Class III: 20Nm EN 6272-1 2.0 N/mm² EN 1542 EN 1504-2: 2004 4/5
Flooring Edition 02.2013 Identification no. 02 08 02 02 001 0 000001 Version no. 01 10. Declaration The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 9.This declaration of performance (DoP) is issued under the sole responsibility of the manufacturer identified in point 4. Signed for and on behalf of the manufacturer by: R&D Manager 06, 2013 Sika Limited Watchmead Welwyn Garden City Hertfordshire AL7 1BQ United Kingdom Phone +44 1707 394444 Telefax +44 1707 329129 www.sika.co.uk email: sales@uk.sika.com Technical Manager Ecology, Health and Safety Information (REACH) For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet (MSDS) containing physical, ecological, toxicological and other safety related data. Legal note: This information is given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika's recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product s suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request. 3 /5 Certificate No. EMS 4308 Certificate No. FM 12504